You are not logged in.
Pages: 1
Help me
3D images can be displayed
Layer creation is not successful
Please tell me the cause
https://drive.google.com/open?id=0B9EfH … XRnV3pfclE
https://drive.google.com/open?id=0B9EfH … kZmM3hyR1k
Last edited by Apple pens (2016-12-24 14:07:50)
Offline
The situation does not change even after 1 hour
Offline
Change profile layer rendering color. If it is not black, send your source file and debug file. Some parameter is wrong.
Offline
Is it the place of the (?)mark?
https://drive.google.com/open?id=0B9EfH … m9NcDhQRlU
Last edited by Apple pens (2016-12-24 14:08:18)
Offline
It is correct color. Go to setup page /tools tab/ press debug button and share it.
Offline
Thank you in advance.
https://drive.google.com/open?id=0B9EfH … TNiZjV1VG8
Last edited by Apple pens (2016-12-24 14:09:27)
Offline
You have changed X/Y resolution to zero which is causing blank layers.
Offline
Thank you
It was displayed.
Offline
There is a problem.
The display of the circle does not disappear
It does not disappear even after the layer is created
https://drive.google.com/open?id=0B9EfH … 0p2Z1RfZzA
--------------------------------------
3d viev is object differs from thing read
The Before one loaded object is displayed
https://drive.google.com/open?id=0B9EfH … FlaVWlHNUk
--------------------------------------
debug info
https://drive.google.com/open?id=0B9EfH … mpwQjVOTjA
Last edited by Apple pens (2016-12-25 01:45:45)
Offline
I could not understand the issue. But first two attachment 3d and layer view is perfectly matching. If you want perfect circle you must make sure the 3d object does not have any tilt.
Offline
Thank you for your polite response
I will try other shapes as well
Offline
Pages: 1