You are not logged in.

Pages: 1

#1 2021-04-06 13:32:34

seraph
Member
Registered: 2021-03-10
Posts: 8

UNKNOWN Level in Status

Hello everyone, I have a problem that seems to appear randomly and more and more frequently.

My printer stops before starting the first layer, just after the G28. I can print several times without any problem and suddenly the printer crashes after the G28. 

Every time the printing fails, I get incomprehensible symbols in the logs. I tried with two different configurations, the first using [[WaitForDoneMessage 3]] to control the movements and the second using [[Delay n.n]].

1. [[WaitForDoneMessage 3]]

PRINTER.MEM.LOG

2021-04-06 08:49:41.513621 {"Layer":"0","module":"Hardware","level":"Notice","msg":"Initializing build # 4268 - generic"}
2021-04-06 08:49:41.513697 {"Layer":"0","module":"Hardware","level":"Warning","msg":"GPU Initializing / VideoCore"}
2021-04-06 08:49:41.514322 {"Layer":"0","module":"Shutter","level":"Debug","msg":"Shutter Close"}
2021-04-06 08:49:41.516882 {"Layer":"0","module":"Gcode","level":"Debug","msg":"Transferring Data M42 P8 S0↵"}
2021-04-06 08:49:41.517268 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
2021-04-06 08:49:41.524842 {"Layer":"0","module":"Shutter","level":"Warning","msg":"Pigpio is not available open /dev/pigpio: no such file or directory"}
2021-04-06 08:49:41.525035 {"Layer":"0","module":"HMI","level":"Warning","msg":"Start HMI display on /dev/ttyAMA0"}
2021-04-06 08:49:41.630454 {"Layer":"0","module":"BCM","level":"Warning","msg":"Display with resolution 1280 x 2400 on port 0 detected"}
2021-04-06 08:49:41.697447 {"Layer":"0","module":"WIFI","level":"Error","msg":"No WIFI dongle has been found."}
2021-04-06 08:49:41.697571 {"Layer":"0","module":"WiFi","level":"Debug","msg":"Status Monitoring"}
2021-04-06 08:49:42.289721 {"Layer":"0","module":"HMI","level":"Debug","msg":"Touch detected: status graph [10 9 8 ] 4 home 1"}
2021-04-06 08:49:42.421082 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: start↵"}
2021-04-06 08:49:42.423459 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo: External ª֕ѩMarlin 2.0.5.3↵"}
2021-04-06 08:49:42.423586 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ↵"}
2021-04-06 08:49:42.429929 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo: Last Updated: 2020-03-31 | Author: (none, dYVձсconfig)↵"}
2021-04-06 08:49:42.432445 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:Compiled: Jul 30 2020↵"}
2021-04-06 08:49:42.435324 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ec닂2ɕ•Memory: 5766  PlannerBufferBytes: 1136↵"}
2021-04-06 08:49:42.438077 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:Hardcoded DYVձсSettings Loaded↵"}
2021-04-06 08:49:42.443389 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  G21    ; Units in mm (mmJ!¡֡½黠Filament settings: Disabled↵"}
2021-04-06 08:49:42.447105 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M200 D3.00↵"}
2021-04-06 08:49:42.447428 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: Y,닂jɰ0 D0↵"}
2021-04-06 08:49:42.449846 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:; Steps per unit:↵"}
2021-04-06 08:49:42.452488 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo: M92 X80	‚ʡ0.00 Z40‚r‚‚*հ0.00↵"}
2021-04-06 08:49:42.457286 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:; Maximum feedrates (units/s):↵"}
2021-04-06 08:49:42.460051 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M203 X3‚r‚‚ʍ00.00 Z5.00 E25.00↵"}
2021-04-06 08:49:42.462765 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:; Maximum Acceleration (units/s2):↵"}
2021-04-06 08:49:42.474584 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M201 X3000.00 Y3000.00 Z100	‚*ÿL‚‚‚r‚‚Recho:; Acceleration (units/s2): P<print_X¬¬˂’?ract_accel> T<travel_accel>↵"}
2021-04-06 08:49:42.477288 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M204 P3000.00 R3000.00 T3000.00↵"}
2021-04-06 08:49:42.477568 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:'↵"}
2021-04-06 08:49:42.485046 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ‘م¹•d: B<min_segment_time_us> S<min_feedrate> T<min_travel_VV–…ѕù J<junc_dev>↵"}
2021-04-06 08:49:42.487744 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M205 B20000.00 S0.00 T0.00 J0.01↵"}
2021-04-06 08:49:42.491416 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:;B½µ•offset:↵"}
2021-04-06 08:49:42.494042 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M206 X0.00 Y0.00 Z0.00↵"}
2021-04-06 08:49:42.494453 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: e,닚‚%settings:↵"}
2021-04-06 08:49:46.525213 {"Layer":"0","module":"Gcode","level":"Debug","msg":"Transferring Data M203 Z15↵M92 Z400↵G90↵G92 Z100 F100↵"}
2021-04-06 08:49:46.531902 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M301 P22.20 I1.08 D114.‚Rokᯫ↵"}
2021-04-06 08:49:46.532084 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:49:46.53718 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Position set to 100"}
2021-04-06 08:49:46.537254 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: X:0.00 Y:0.00 Z:100.‚*鰮00 Count X:0 Y:0 Z:0↵"}
2021-04-06 08:49:46.537404 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:49:51.519201 {"Layer":"0","module":"Monitoring","level":"Notice","msg":"Usable disk space 27335 / 29777 MB"}
2021-04-06 08:52:12.045838 {"Layer":"0","module":"Printing","level":"Notice","msg":"Start printing ibt 1005"}
2021-04-06 08:52:12.051135 {"Layer":"0","module":"Gcode","level":"Debug","msg":"Transferring Data M92 Z400↵G28↵"}
2021-04-06 08:52:12.05564 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:52:14.057612 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:52:18.057783 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processZ멥cho:busy: processing↵"}
2021-04-06 08:52:20.059084 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:52:22.060303 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: e,닒Ս庠processing↵"}
2021-04-06 08:52:24.060465 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:52:28.060709 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: proces®˫)echo:busy: processing↵"}
2021-04-06 08:52:30.059486 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ec닒Ս婠processing↵"}
2021-04-06 08:52:32.059524 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:52:34.059726 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:52:36.059801 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:52:38.061176 {"Layer":"0","module":"Logging","level":"Info","msg":"Suppressing duplicate logs"}
2021-04-06 08:52:43.475159 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Position set to 0"}
2021-04-06 08:52:43.475269 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: X:0.00 Y'r‚‚ҩ0.00 E:0.00 Count X:0 Y:0 Z:0↵"}
2021-04-06 08:52:43.475581 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: Zսٕ}½mp↵"}
2021-04-06 08:52:43.475726 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}

2. [[Delay n.n]]

2021-04-06 08:53:29.55416 {"Layer":"0","module":"Hardware","level":"Notice","msg":"Initializing build # 4268 - generic"}
2021-04-06 08:53:29.55424 {"Layer":"0","module":"Hardware","level":"Warning","msg":"GPU Initializing / VideoCore"}
2021-04-06 08:53:29.554855 {"Layer":"0","module":"Shutter","level":"Debug","msg":"Shutter Close"}
2021-04-06 08:53:29.557359 {"Layer":"0","module":"Gcode","level":"Debug","msg":"Transferring Data M42 P8 S0↵"}
2021-04-06 08:53:29.557712 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Terminal Reader Activated"}
2021-04-06 08:53:29.564684 {"Layer":"0","module":"HMI","level":"Warning","msg":"Start HMI display on /dev/ttyAMA0"}
2021-04-06 08:53:29.57503 {"Layer":"0","module":"Shutter","level":"Warning","msg":"Pigpio is not available open /dev/pigpio: no such file or directory"}
2021-04-06 08:53:29.673408 {"Layer":"0","module":"BCM","level":"Warning","msg":"Display with resolution 1280 x 2400 on port 0 detected"}
2021-04-06 08:53:29.726318 {"Layer":"0","module":"WIFI","level":"Error","msg":"No WIFI dongle has been found."}
2021-04-06 08:53:29.726431 {"Layer":"0","module":"WiFi","level":"Debug","msg":"Status Monitoring"}
2021-04-06 08:53:30.228905 {"Layer":"0","module":"HMI","level":"Debug","msg":"Touch detected: status graph [10 9 8 ] 4 home 1"}
2021-04-06 08:53:30.461892 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: start↵"}
2021-04-06 08:53:30.462342 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echK*ᑥrnal Reset↵"}
2021-04-06 08:53:30.464165 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: Marlin 2.0.MiR↵"}
2021-04-06 08:53:30.47072 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo: Last Updated: 2020KšjšŠ⁁uthor: (none, defX]‹config)↵"}
2021-04-06 08:53:30.473167 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:Compile–Rձ30 2020↵"}
2021-04-06 08:53:30.476182 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo: FrYYj•µ½ɥ頵766  Plan«ɉՙferBytes: 1136↵"}
2021-04-06 08:53:30.482674 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:Hardcode'•™…ult Settings LoaV–¨¡½頠G21    ; Uniׁin mm (mm)↵"}
2021-04-06 08:53:30.4828 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ↵"}
2021-04-06 08:53:30.488017 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:; FZ+µ•¹t settings: Disa,«‘)echo:  M200 D3.0Recho:  M200 D0↵"}
2021-04-06 08:53:30.490376 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:; StÝper unit:↵"}
2021-04-06 08:53:30.495817 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo: M92¡0.00 Y80.00 Z4000.00 E50r‚‚Recho:; Maximum feedratY.Bª¹its/s):↵"}
2021-04-06 08:53:30.499859 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M203 X300.0ʍ00.00 Z5.00 E25.00↵"}
2021-04-06 08:53:30.504626 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:'j…ᥭum Acceleration (unitsiɩ:↵"}
2021-04-06 08:53:30.507516 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M201 X3000.00 Y3000.00 Z100.00 E10000.00↵"}
2021-04-06 08:53:30.516366 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:; AcceleratZˋBª¹¥ts/s2): P<print_accel> R<ret®ѽ…el> T<travel_accel>↵"}
2021-04-06 08:53:30.526815 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:jɰ4 P3000.00 R3000.00 T30‚r‚‚Recho:; Advanced: B<min_seV«¹џtime_us> S<min_feedrate>¢?_travel_feedrate> JRչ}dev>↵"}
2021-04-06 08:53:30.529553 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M205 B20000.‚šÁ.00 T0.00 J0.01↵"}
2021-04-06 08:53:30.529945 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:'B½µ• offset:↵"}
2021-04-06 08:53:30.5338 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:  M206 r‚‚ʁ.00 Z0.00↵"}
2021-04-06 08:53:30.536177 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo§'‚%settings:↵"}
2021-04-06 08:53:34.565444 {"Layer":"0","module":"Gcode","level":"Debug","msg":"Transferring Data M203 Z15↵M92 Z400↵G90↵G92 Z0 F100↵"}
2021-04-06 08:53:34.572644 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:jͰ1 P22.20 I1.08 D114	‚Rok↵"}
2021-04-06 08:53:34.572837 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:53:34.572972 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:53:34.576761 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Position set to 0"}
2021-04-06 08:53:34.576846 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: X:0.00 Y:0.00 Z:0.00 E'r‚‚½չсX:0 Y:0 Z:0↵"}
2021-04-06 08:53:34.577029 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:53:39.566826 {"Layer":"0","module":"Monitoring","level":"Notice","msg":"Usable disk space 27335 / 29777 MB"}
2021-04-06 08:56:10.60418 {"Layer":"0","module":"Printing","level":"Notice","msg":"Start printing ibt 1005"}
2021-04-06 08:56:10.605833 {"Layer":"0","module":"Gcode","level":"Debug","msg":"Transferring Data M92 Z400↵G28↵"}
2021-04-06 08:56:10.611191 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}
2021-04-06 08:56:12.61274 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echKՍ婠processing↵"}
2021-04-06 08:56:14.612766 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:56:16.612754 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: echo:busy: processing↵"}
2021-04-06 08:56:17.011473 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Position set to 0"}
2021-04-06 08:56:17.011582 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: X:0.00 Y:0.00 Z:0.00 E:r‚‚½չсX:0 Y:0 Z:0↵"}
2021-04-06 08:56:17.011891 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: Z_m˕}omp↵"}
2021-04-06 08:56:17.012031 {"Layer":"0","module":"Terminal","level":"Notice","msg":"Received Data From Controller: ok↵"}

Sometimes the last line of the log is a warning, "External Call Completed tvservice-s state 0xa ..."

Any idea what is wrong and why there are incomprehensible symbols in the logs?

Offline

#2 2021-04-06 16:49:13

bigfilsing
Member
Registered: 2016-11-20
Posts: 306

Re: UNKNOWN Level in Status

Hi. It would be helpful if you posted what hardware / printer you have

I'm not very good with interpreting error messages but the first place i would look/ check would be serial / USB cables and HDMI connection.
Good luck

Last edited by bigfilsing (2021-04-07 02:00:59)

Offline

#3 2021-04-06 19:38:52

Shahin
Administrator
Registered: 2016-02-17
Posts: 3,546

Re: UNKNOWN Level in Status

It is power or cable issue. As bigflising mentioned please share more data about your setup.

Offline

#4 2021-05-03 10:25:12

seraph
Member
Registered: 2021-03-10
Posts: 8

Re: UNKNOWN Level in Status

Thanks for your answers, changing the raspberry fixed the problem!

Offline

Pages: 1

Board footer

Powered by FluxBB