You are not logged in.
I had perfect print few days ago with 25 micron Z resolution. But I wanted to try 10 micron resolution. I have create new profile, by making Clone from previews and start to change parameters for 10 microns resolution, by lowering exposition and speed up moves. I have Submit all in settings first make current default VAT and start creating new part to print . I have select new name and upload file for processing. Finally after Z and projector calibration, i have start print, but problem appear.
Projector did not project anything, everything looks fine , Z axes moves nicely, I'm seeing layers on PC but they are not projected to surface. I have restart machine and PC , but same things occur again. Need advice how to solve this . I did something wrong , but I don't know what !
Any help?
Best regards
Offline
I think it is a coincident and nothing to do with better z resolution. Maybe it is cabling or projector issue. Connect HDMI to your monitor to see if it project images or not.
Offline
Checkout layer's color maybe it changed to something close to black so you do not see anything
Offline
Thank's for replay! I did not have time to check again today, but I have run projector calibration procedure and I have seen normal light , white or red in HI ilumination, but when I have started program to print I see some light that pass when projector send black screen, but no generated frame as is showed on PC screen. I had situation like this before when we started to edit some data on already defined part. But after I uploaded file again for new slicing procedure, new print started normaly. In this case that did not hapen again. Anyway I will check color tomorow and inform you, was that a problem. Best regards Sacha
Offline