Latest build changelog

Shahin · 2016-02-17 08:51:58

Build #1006

Pixel dimming
Cloud dashboard
Binary communication support w. projectors
Command execution to turn projectors on/off

Shahin · 2016-02-19 18:08:19

Build #1010

Feature: Dimming feature improved
Feature: Smarter online dashboard update
Bugfix: Plate edit reset layer number - Fixed
Bugfix: Connection leaks

Shahin · 2016-02-22 00:03:39

Build #1014

Feature: UPnP auto discovery support
Feature: Profile Export/Import
Bugfix: Log flood on serial port problems

Shahin · 2016-02-23 08:48:45

Build #1021

Feature: Set GPIO to HIGH and LOW by GCODE. eg [[GPIOHigh 12]]
Feature: New hardware fault detection module, currently supports fault pin on stepper drivers such as DRV8825
Bugfix: Miss local IP address on some cases

Shahin · 2016-02-29 16:40:43

Build #1034

Feature: Resin and resolution calibration

Shahin · 2016-03-04 19:35:15

Build #1040

Feature: Calibration plate generator shear option
Feature: USB storage support for plate upload
Feature: Projector warmup support
Feature: Display more details for calibration plate
Bugfix: More details on plate page
Bugfix: Shutdown cancel does not work
Bugfix: Issue with new raspbian

Shahin · 2016-03-08 21:55:48

Build #1050

Feature: Hardware resource monitor
Feature: Custom buttons support condition
Bugfix: Report problems on graphic stack instead of panicing

Shahin · 2016-03-12 10:00:08

Build #1052

Feature: New SD image
Feature: Force Stop
Feature: Improved setup script

Shahin · 2016-03-16 22:36:48

Build #1061:

Feature: Crash/Print recovery for RAMP boards
Feature: New gcode keywords PositionChange, PositionSet, CurrentPosition, LayerPosition
Feature: Separate resume and start gcodes
Feature: Homing in both direction is possible now
Bugfix: Shutter problem on rpi3
Bugfix: Multiple file upload problem

Shahin · 2016-03-18 09:03:03

Build #1076:

Feature: Logging moved to memory, lot less disk IO. Speed improvement on UI
Feature: Display number of process being used
Change: More efficient thread management
Change: Rewrite shutter module to improve stability
Change: UI change
Bugfix: Get killed on slow syscalls

Shahin · 2016-03-24 21:33:20

Build #1089:

Feature: On screen help
Feature: Merged all distributions / Distribution change feature
Feature: Hidden setup customization feature for 3d printer manufacturers
Bugfix: Manual camera button does not work
Bugfix: Block active plate during printing
Bugfix: Raspian desktop skip rc.local

Shahin · 2016-03-30 10:35:32

Build #1106:

Feature: Absolute positing support on z-calibration page
Feature: Storage expand from interface
Feature: Program crash recovery. Will stop printer on the most of issues instead of crashing
Change: More on screen helps
Bugfix: Autostop infinitive run

Shahin · 2016-04-01 10:32:34

Build #1115:

Feature: Paint and Extrude!
Feature: Create plate from single image
Feature: Debug info exporter on tools page
Feature: Projector power cycle options

Shahin · 2016-04-08 14:20:41

Build #1125:

Feature: WiFi manager - RPi3 wireless support
Change: Hide extra buttons for RAMP users
Bugfix: Paint loading issue
Bugfix: Slicer crash recovery
Bugfix: Mask grayscale image crash program
Bugfix: Manual calibration buttons do not conform to the axis direction

Shahin · 2016-04-17 00:16:14

Build #1139:

Feature: Dynamic Cure Time
Feature: HDMI signal off/on support
Feature: API - Alpha Stage
Feature: Terminate button for WiFi connections
Bugfix: WiFi module keep trying even without hardware available
Bugfix: RAMPS board position gets reset on restart
Bugfix: Give RAMPS board some time before sending bootup gcode
Bugfix: Editing inactive plate blackout data during printing cause active plate id swap
Bugfix: Prevent recursive redirection on missing build file

Shahin · 2016-04-25 06:58:51

Build #1147

Feature: Stepper enable/disable buttons for direct control
Feature: ETA on dashboard
Bugfix: "free list corrupted" error
Bugfix: Force stop does not break [[WaitForDoneMessage]]

Shahin · 2016-05-12 16:41:18

Build #1163

Feature: Binary STL file support
Feature: Enable/Disable mask
Feature: White image to help collect floating pieces (Adam's contribution)
Feature: More projector power cycle modes
Feature: Mute printer sound at the end of print
Feature: Default profile
Bugfix: Data race cause random printer crash
Bugfix: Terminal slowdown
Bugfix: Slice render slow down
Bugfix: Display wrong layer id on some cases

Shahin · 2016-05-27 07:54:02

Build #1172

Feature: Read lamp life
Feature: Lamp life could be used to calculate cure time
Feature: Share TotalSolidArea and LargestArea in realtime
Bugfix: Disable sound throw js error

Shahin · 2016-06-10 14:26:46

Build #1178

Feature: Support centre from origin for STL, SLC and SVG files
Feature: Advanced permissions
Feature: Display CPU temperature
Feature: Sparklines for hardware stats

Shahin · 2016-06-22 15:11:28

Build #1183

Feature: ASCII STL support
Feature: Detect corrupted plates
Feature: New line termination options for the projectors

Shahin · 2016-07-15 14:40:33

Build #1194

Feature: Dynamic Speed
Feature: Send commands to RAMPS through API
Feature: Ability to listen on any port
Feature: Upgrade to beta version button
Feature: Suppressing duplicate logs
Bugfix: Layer height limit removed

Shahin · 2016-07-30 17:07:57

Build #1204

Feature: Render solid areas with any color
Feature: Send custom command to the projector
Improvement: Faster PNG generation by lowering deflate compression
Improvement: Tighten GPIO pulse generation loop
Bugfix: Chart overlap issue on low resolutions
Bugfix: Some of the projector types does not working correctly

Shahin · 2016-08-21 06:47:02

Build #1220

Feature: Mask generator
Feature: Dynamic calibration image generation
Feature: New gcode keyword [[TotalNumberOfLayers]]
Bugfix: Requesting wifi list before wifi initialization
Bugfix: Add stl support to usb device
Bugfix: Using dynamic speed and cure time cause infinitive loop

Shahin · 2016-08-26 06:49:21

Build #1221

Feature: [[Exec command]] keyword to run external command
Feature: [[ExecReturn command]] keyword to run external command and send the result to RAMPS
Feature: [[Net url]] keyword to send get request
Feature: [[NetReturn url]] keyword to send get request and send the result to RAMPS

Shahin · 2016-11-01 15:04:23

Build #1261

Feature: New [[SmallestArea]] and [[AreaCount]] keywords
Change: Golang compiler upgrade to 1.7
Large number of bugfixes

nanoDLP

#1 2016-02-17 08:51:58

Latest build changelog

#2 2016-02-19 18:08:19

Re: Latest build changelog

#3 2016-02-22 00:03:39

Re: Latest build changelog

#4 2016-02-23 08:48:45

Re: Latest build changelog

#5 2016-02-29 16:40:43

Re: Latest build changelog

#6 2016-03-04 19:35:15

Re: Latest build changelog

#7 2016-03-08 21:55:48

Re: Latest build changelog

#8 2016-03-12 10:00:08

Re: Latest build changelog

#9 2016-03-16 22:36:48

Re: Latest build changelog

#10 2016-03-18 09:03:03

Re: Latest build changelog

#11 2016-03-24 21:33:20

Re: Latest build changelog

#12 2016-03-30 10:35:32

Re: Latest build changelog

#13 2016-04-01 10:32:34

Re: Latest build changelog

#14 2016-04-08 14:20:41

Re: Latest build changelog

#15 2016-04-17 00:16:14

Re: Latest build changelog

#16 2016-04-25 06:58:51

Re: Latest build changelog

#17 2016-05-12 16:41:18

Re: Latest build changelog

#18 2016-05-27 07:54:02

Re: Latest build changelog

#19 2016-06-10 14:26:46

Re: Latest build changelog

#20 2016-06-22 15:11:28

Re: Latest build changelog

#21 2016-07-15 14:40:33

Re: Latest build changelog

#22 2016-07-30 17:07:57

Re: Latest build changelog

#23 2016-08-21 06:47:02

Re: Latest build changelog

#24 2016-08-26 06:49:21

Re: Latest build changelog

#25 2016-11-01 15:04:23

Re: Latest build changelog

Board footer