You are not logged in.
I`d like to setup this mode with pauses that let lcd to cool:
1. Normal printing mode for first 30 layers 0.04;
2. Continues printing of 10 layers
3. Pause 20 sec
Repeat step #2 &3 till the end
Offline
[[Delay {([[LayerNumber]]%10)*20}]]
Offline
Could you check the profile?
https://www.dropbox.com/s/5gafewabbgpn7 … 1.png?dl=0
https://www.dropbox.com/s/j3lf7ugbxaeva … 8.png?dl=0
https://www.dropbox.com/s/g6k8b62j4orcs … .json?dl=0
Doesn't work proper way.
Offline
https://www.dropbox.com/s/5rkzqoux8liwz … .json?dl=0
setup page settings
https://www.dropbox.com/s/iv8cd38v66n0i … 7.zip?dl=0
debug info
Offline
Help !!!
Offline
[[Delay {([[LayerNumber]]%10==0)*20}]]
Offline
[[Delay {([[LayerNumber]]%10==0)*20}]]
1. In which field should I put this?
2. Should I change anything in Machine settings for this mode and restore before switching to normal peel mode?
3. What settings should I also change in resin profile settings along with setting 0 sec in wait before and after lift, 0 mm lift after print ?
Many thanks for your help!
Offline
1. after layer code box
2. no
3. nothing to best of my knowledge
Offline
https://photos.google.com/photo/AF1QipP … RafL7WEkqS
Close to video end there rapid LED relay on/off cycles. Could we avoid it?
Offline
Up
Offline
The shared image is not exist
Offline
Offline
Share a debug file also how do you expect it to work so I could verify your settings.
Offline
