{% if !mute %} {% else %} {% endif %} {% if panicked %}
It seems your printer experienced issue during the last print. Send Report Dismiss
{% endif %}
Could not connect to the NanoDLP. Please check your network connection.

Layer

Height

Remaining

ETA

Elapsed

Action
0%
To Layer
Gcode Before
Wait Before
Cure Time
Wait After
Gcode After
Lift
Lift Wait

{% if status.Halted %} Force Stop {% else %} {% endif %}
{% if arch=="arm" %} {% endif %}

{% if autoShutdown %} Disable Auto Shutdown {% else %} Enable Auto Shutdown {% endif %}   {% if cast==false %} Start Display   {% endif %} {% if projectorPowerCycle==1 %} Projector Off   {% endif %} {{ buttonsView(buttons,"/") }} Take Photo
Are you sure you want to force stop printing? Warning, Force Stop will reset the printer. Printing progress will be lost. Are you sure you want to stop printing? It will stop after the current layer is completed. If you want to abort the current layer, confirm stop then click on Force Stop button. Are you sure you want to power off the printer? Are you sure you want to power off the projector? Are you sure you want to start the display? It will automatically select the second display. Are you sure you want to restart the printer? Are you sure you want to resume the previous print?